The vagaries of Blogger and Dyeing Yarns

Having spent ages trying to access my old blog (I now have a google account so can't seem to access my old blog linked to my old email) I've decided to give in and start a new blog with the same name as the old one but with a different URL!!

Sometimes I hate computers!!!!

Anyway after all that I wanted to post about the yarns I dyed a few weeks ago. In the workshop I was showing how to rainbow dye with both acid and fibre reactive dyes and also how to paint dye with acid dyes and how to use the plastic bag method with fibre reactive dyes.


This first group of 3 yarns where all dyed with acid dyes using the rainbow dyeing method i.e. the wet skeins where put in a pan with a small amount of water and the dye powders sprinkled over them. Although alt the time the dye seemed quite strong the finished colours are quite muted. The large skein at the top was Norfork Horn wool, the middle skein was 100% soya yarn, Just Soya from Sirdar which was already a stone colour and the bottom skein was 100% smooth mohair.


These next 2 yarns are both bamboo, one tape yarn and one plyed yarn, both have been dyed with Fibre Reactive dyes. The skeins where soaked in water first and then the dyes where painted on with a sponge brush.

These 2 yarns are also dyed with Fibre reactive dyes. The top skein was bamboo and the bottom skein is Just Soya, from Sirdar in a stone colour. I didn't make sure the dye was pushed all the way through the fibres so there are areas of undyed yarn.

It was interesting to compare the 2 skeins of soya yarn as one was dyed with acid dyes (for protein) and one was dyed with Fibre Reactive dyes (for cellulose fibres). Neither of the colours where particularly strong but that might also be due to the fact the yarn has already been dyed once.

These 2 skeins of green yarn are bamboo and cotton soya mix dyed with Fibre Reactive dyes using the plastic bag method. The wet skeins where put in a plastic bag with the dye and chemicals already added. The skeins where 'mashed' for about 5 minutes or so until all the liquid was absorbed into the yarn and then left for about 30 minutes before being rinsed. Both skeins took the colour well.

This skein is cashgora yarn dyed with acid dyes which where painted on. Once the dye was applied the skein was wrapped in clingfilm and steamed for 30 minutes. Cashgora which is a variation of angora goat takes dye in a similar way to mohair i.e. good depth of colour and also has a sheen.

This last picture is of some milk fibre tops which has been painted with acid dyes and then steamed to fix the dye. I haven't tried to spin the top yet so I don't know if the dye process has had any effect on the spinning handling of the fibre. I'll post something about this if I ever get around to spinning it.

It was a good day on the whole and I think the students enjoyed the dat as well.